Category: pattern

Posted on by

Line Where The Sky Meets the Sea

Now available on LoveCrafts, Ravelry and PayHip.  Use code OCEAN to get 20% off on Ravelry and Payhip through Oct. 3rd, 2021.

Some people feel the call of the Sea. Open water, no land in sight, that is where your heart lies. I know this feeling well. I grew up near the North Atlantic and I love being on a boat offshore, wondering what lies just over the horizon. When I first watched the film “Moana” and I heard her sing “There’s a line where the sky meets the sea and it calls me” I knew exactly what she meant. To my fellow knitters who also hear the sea’s siren call, I present this shawl.

 

This shawl is worked in three sections. First you work the bottom stockinette section.  Then you work the cable band like an applied edge. Lastly, you pick up stitches on the cable band and work the top stockinette section. The pattern contains directions on exactly how/where to pick up stitches and a link to a video tutorial about picking up stitches.

Materials

•1000 yards [914.5 m] of Main Color fingering-weight yarn, sample knit in Blue Heron Cotton Rayon Twist Lace Yarn, fingering weight yarn.
• 40 yards [36.5 m] of Contrast Color fingering weight yarn, sample uses silk/linen laceweight from Buchanen Fibers in Iris colorway.
• US 4 [3.5mm] circular needle, or size needed to obtain
gauge, 40 inch [100 cm] length

Gauge
26 sts and 30 rows per 4 inches [10 cm]
Size
5 feet [1.5 m] wide by 15 inches [38 cm] deep

Pattern Difficulty Level: Advanced

This pattern has been tech edited and test knit and works in both plant and animal fibers – a great big thank you to my test knitters!

Available on LoveCrafts, Ravelry and PayHip. 

 

 

Posted on by

Send Me That Horizon

I’ve always loved the sea. I grew up near the ocean, with both sets of grandparents living a few dozen feet from the water. Playing on the beach, listening to the waves, sailing on a boat, hiking along ocean-side cliffs – I love anything involving the sea. But nothing is the same as being far from shore with no land in sight. I love seeing the horizon taper off to meet the ocean waves; so when I first watched the original Pirates of the Caribbean movie and Captain Jack Sparrow looked into the distance and murmured “Send me that horizon” under his breath my heart sang. I know that feeling, I love that feeling, and with this shawl I want you to experience it too.

This is an easy pattern (most of it is stockinette) and also easy to adjust the length – providing you have enough yarn, you can make this shawl as deep as you want. Incorporating a variation of the feather and fan/old shale, if you can k2tog, ssk and kfb you can make this shawl.

This pattern has been tech edited and test knit.

Add to Ravelry cart

Purchase on  LoveCrafts

Purchase on PayHip

Materials
• 1000 yards of Blue Heron Cotton Rayon Twist
• US 4 [3.5mm] circular needle, or size needed to obtain gauge, 40 inch [100 cm] length
• Tapestry needle

Gauge
26 sts and 30 rows per 4 inches [10 cm]

Size
5 feet [1.5 m] wide by 15 inches [38 cm] deep.

Skills Needed
• k2tog
• kfb
• ssk
• yo

Add to Ravelry cart

Purchase on  LoveCrafts

Posted on by

Pont du Marais

Have you ever been in a fog so thick you can’t see beyond your hand? My grandparent’s village is a 6-mile peninsula sticking into the North Atlantic and the fog there is epic. Rolling in off the cold waters that surround the village, the fog encircles you in a gray mist while the waves crash on the shore, out of sight but never out of hearing. When I first saw this yarn gradient I knew exactly what this shawl would become, showcasing the swirling fog and waves.

This shawl is knit top-down, back-and-forth and the result is an almost-circular shawl with a cutout that allows it to be worn easily. (see last image).

This pattern has been tech edited and test knit. Thank you to test knitters Kali, Audrey, Sheila, and Jyoti!

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

Materials

720 yards fingering weight, gradient recommended
Stitch markers
Tapestry needle

US 4 3.5 mm circular needles, or size needed to obtain gauge, 40 inches 100 cm or longer
Gauge
24 sts and 32 rows over 4 inches 10 cm after washing
and blocking.

 

Size

15 inches 38 cm deep from cast on edge to bottom of the wave pattern, roughly 36 in 91.5 cm diameter.

Add to Ravelry cart

Purchase on LoveCrafts

Posted on by

Out Tonight

Inspired by the women of the musical Rent, this day-to-night top looks like a plain shell under your blazer at the office. Joanne had to dress for the office as a lawyer, but she certainly knew how to have fun with Maureen after work. Come closing time, toss that blazer aside and show your true colors – whatever color that may be is up to you. Rent came out when I was in high school and had a huge affect on young, theater-geek me. My sweet 16 gift was tickets to go see the first US tour in Boston; I’ve seen it at least 10 times since then. The music still provides me with hope and inspiration – including this pattern, the first in a collection.

 

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

Fitted across the bust and flowy over the waist and hips, this day-to-night shell is ready to go wherever you are. As Mimi says, “Take me out tonight.”

Bust sizes 34 (37, 40, 43, 46, 49, 52) inches [86.5 (94, 101.5, 109, 117, 125, 132) cm]

Recommended Ease: 1 to 3 inches [2.5 to 7.5 cm] at bust. Model has a 39” bust and is wearing a size 40”.

Materials:
600 (680, 730, 800, 880, 955, 1045) yards [549, 622, 668, 732, 805, 873, 956) meters] of Elspeth Lavold Hempathy, 40% Hemp/40% Cotton/20% Modal, DK weight yarn that gets softer the more you wash it – Main Color
35 yards of Birdies Knits sport weight 100% cotton in the Emmelyne colorway – Contrast Color

Pattern Notes:

This pattern is very flexible and can be made in almost any yarn that fits the gauge. The Contrasting Color yarn does not have to be the same yarn or same gauge as the Main Color yarn. It doesn’t even have to be the same fiber! As long as the row gauges are similar and the fibers can be washed in the same manner, you’ll be fine. The samples are knit in two machine washable fibers with very different contents. I knit them separately, machine washed and dried each of them, then seamed them together.

Please wash and block ALL the pieces before you start seaming!

For the shoulder pieces, all increases are worked towards the neck.

Add to Ravelry cart

Purchase on LoveCrafts

A Note On Color:
Enjoy the color. Make it as quiet or as loud as you want. Have fun! Just remember that if you use two very different colors, please wash them separately before you seam them. Reds and blues especially tend to bleed – wash them at least once (I would wash 2 or 3 times) before pairing with a light color like the one pictured in the sample.

This pattern has been tech edited and test knit.

Posted on by

Strawberry Blossoms

I am so excited to be releasing a new pattern after taking more than a year off.

Inspired by the little yellow flowers of the wild strawberry plants that grow in my backyard, this top is flutters in the breeze and reminds me of the little yellow flowers blooming on warm, sunny days. These delicate little flowers don’t bear fruit, but they thrive even in horrible conditions, like the shady, acidic clay soil in my backyard. This really hit home with me as I injured my hand last year and was unable to design for most of 2018. Strawberry Blossoms is the first pattern I worked after my injury and the tenacity of those little flowers really resonated with me.

Available for purchase on Ravelry, PayHip and LoveCrafts.

Fit
Bust sizes 32 (35, 38, 41, 44) inches 82 (89, 97, 104, 112)
cm finished size. See schematic in photos for more measurements.  Larger sizes are currently in development (as of 9/29/21).

Recommended Ease: -3 to -1 inches -7.5 to -2.5cm at the bust. CoBaSi gives a VERY stretchy fabric at this gauge and I highly recommend negative ease across the bust. If you use a different yarn that gives you less-stretchy fabric you may want 0-2 inches 0-5cm of positive ease.

Sample: Model has a 39” bust and is wearing size 38”.

Suggested Yarn
Sample uses 680 (745, 810, 875, 940) yards 621 (681, 740, 800, 859) meters of CoBaSi yarn from Hikoo by Skacel, 55% Cotton, 21% Nylon, 16% Bamboo, 8% Silk, fingering weight yarn
Any fingering weight yarn will work, thought the fabric may be less stretchy.

Suggested Needles
US 3 3.25mm circular needle, or size needed to obtain gauge, 24 inch 60cm length
US 1 2.25mm circular needle, same length as larger needle
Notions
Cable needle, tapestry needle, stitch markers, scrap yarn

This pattern has been tech edited and test knit. A great bit THANK YOU to my test knitters KnitsyBitsyKayla, mrldz and Stephanie.

 

View on Ravelry

View on LoveCrafts

 

Posted on by

Star Wars Sweater

My eldest son asked me to knit him a Star Wars sweater so I started with the idea of using R2-D2 and this sweater was born.  Many of you on Instagram have asked me to write up this pattern but since Star Wars is someone else’s intellectual property I’m going to show you what I did and make the charts I used freely available to anyone.

I started with the free pattern, Nordic Yoke Set Pullover from Patons, and changed the charts for the yoke and bottom of the body.  I also decided to skip the colored ribbing on the cuffs and body for the purely selfish reason of saving the gray to knit another sweater for my younger son next fall (he wants a BB8 sweater!).

YOKE

The yoke has an X-wing (as viewed from above), R2-D2 and a light saber.

I used the exact dimensions of the Nordic Yoke Pullover Sweater chart, so you can simply use this chart in it’s place and it will work just fine.  Some lines have more than 2 colors – in many cases I chose to come back later and use duplicate stitch so as to avoid carrying 3 or 4 colors in one row of stranded colorwork.  If you’re adept at carrying 3 or 4 colors in 1 row of colorwork, good for you!  I also used a backstitch-like technique from my cross stitching days called straight stitch to delineate R2D2’s legs.  This is represented by an orange line in the colorwork chart.  you can ignore this if you wish.  I did the outlining in the same tan color I used for the yoke background.

Click the small picture of the chart above to see the full size chart.

BOTTOM OF SWEATER

I did have to change this chart.  The sweater uses an 8-st repeat but I just couldn’t get a tie-fighter to look good in 8 sts.  I used 9.  If you use this bottom chart, YOU MAY HAVE TO ADJUST the number of body stitches before starting the colorwork as follows:

  • Sizes 4 and 10 – no changes needed
  • Sizes 6 and 12 – decrease 3 sts the row BEFORE you start the colorwork
  • Size 8 – increase 3 sts the row BEFORE you start the colorwork

Click on the small picture of the chartbelow to see the full size chart.

 

The only changes I made to the pattern itself were to make the arms and torso longer than called for so that it will still fit my son in the fall (I hope!)

Posted on by

Use Your Stash Shawl

Use Your Stash Shawl

Wow, I can’t believe the response to this pattern!  You all are amazing, thank you so much for your support in pushing this pattern to the top of the Hot Right Now on Ravelry!

I designed this shawl for one very specific reason: sometimes you want to knit those last bits of leftover yarn but you have no way to determine if you have enough to complete a pattern. Thanks to the genius of Lee Meredith (Leethal Knits) you can, and you never need to pick up stitches. This pattern incorporates the Sideways Edge Cast On that she created, with her permission. For more information on this cast on, please visit Lee’s blog at: https://www.leethal.net/zine/sideways-edge-cast-on-a-knit…

Shawls can be knit in either garter stitch (see red & white sample) or stockinette (see purple sample). Can be knit as a rectangular shawl, or use the optional short rows for a slight crescent shape.

Tech Editor: Dana Gervais

Gauge: Any! This shawl works with any yarn weight or fiber content.

Materials
• Circular needle 40 inches (101.5 cm) or longer, in size needed for preferred gauge
• Stitch marker
• Tapestry Needle
• Yarn – any amount, one color or more.

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

Red and White sample is 5 feet (1.5m) long and uses 127(116m) yards of white and 226 yards (206.5 m)of red, both in worsted weight on a US size 8 (5 mm) needle. Knit in garter stitch without short rows.

Purple sample is 6 feet (1.8m) long and knit in sport weight using 545 yards (489 m) on US size 3 (3.25mm) needle. Knit in stockinette with short rows to make a slight crescent.

Pattern includes a worksheet you can use to calculate how long and how deep your shawl will be given how much yarn you have.

Add to Ravelry cart

Purchase on LoveCrafts

Posted on by

Linen Butterflies

I designed this sweater especially for my mom. She wanted a lightweight sweater to wear in the evening down in Florida after the sun went down, and after pouring over dozens of lace patterns together, this sweater was born.

This sweater is knit bottom-up to the armholes, then separates for front and back. The set-in-sleeves are picked up and knit from the arm holes and short rows are used to make a sleeve cap. Lace pattern is BOTH charted and written out.

Add to Ravelry cart

Purchase on LoveCrafts

Sizes 32.75(35, 37.25, 39.5, 41.75)(44, 46.25, 48.5, 51) inches 83(89, 94.5, 100.5, 106)(112, 117.5, 123, 129.5) cm
Tech Editor: Dana Gervais

Designed to be worn with 1-3 inches 2.5 -7.5 cm of positive ease (purple sweater has 3 inches positive ease, gold sweater has -1 inch ease on model).

CHECK YOUR GAUGE! Linen behaves very differently than other fibers. Put your 100% linen swatch in the washing machine and dryer before measuring. For other fibers, wash and dry your gauge swatch as you intend to care for your garment.
2.25” wide x 1.75” high per repeat; 14 sts x 16 rows per lace repeat after machine washing and machine drying.

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

 

 

Posted on by

Mommy’s Tunic

I began to design this tunic when baby #2 was on the way and I remembered how frumpy I felt after having my first baby – maternity clothes made me look pregnant still, but my “regular” wardrobe really wasn’t flattering. Simply put, I wanted to make a top that would flatter my post-baby figure, hide my squishy parts, and most importantly make me feel beautiful again. Oh, and I wanted it to be flexible enough to wear while pregnant, too. (see pictures of me in blue, pregnant with baby #2) Thus, this tunic was born.

With an A-line torso, a fitted bodice and cabled band around the empire waist, this tunic flatters your curves. The lace edge of the tunic portion floats lightly and comfortably over the hips. Similarly, the lace-edged sleeves are wide and flatter upper arms.

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

This top has a unique construction. The cableband, which sits below the bust, is worked first, completed and blocked. Then stitches are picked up around the top of the band and the Bust/Yoke areas are worked bottom up. Next, stitches are picked up around the bottom of the band and worked top-down.

The sleeves are set-in sleeves using picked up stitches and short rows. Finally, the lace collar is worked.

Choose which size to knit based on your ribcage circumference measurement just below the bust. The pattern as written allows for a 3-4 inch increase in bust size over ribcage measurement. For instructions on modifying the bust fit, please see the Bust Adjustments section on last page.

Tech Editor: Dana Gervais

Sizes 30 (33, 36, 39, 42, 45, 48) inches
76 (84, 89-94, 91.5, 99, 106.5, 114, 122) cm around the ribcage as measured immediately below the bust. Recommended ease -1 to 1 inch


This top has a unique construction. The cableband, which sits below the bust, is worked first, completed and blocked. Then stitches are picked up around the top of the band and the Bust/Yoke areas are worked bottom up. Next, stitches are picked up around the bottom of the band and worked top-down.

The sleeves are set-in sleeves using picked up stitches and short rows. Finally, the lace collar is worked.

Tech Editor: Dana Gervais

Sizes 30 (33, 36, 39, 42, 45, 48) inches
76 (84, 89-94, 91.5, 99, 106.5, 114, 122) cm around the ribcage as measured immediately below the bust. Recommended ease -1 to 1 inch

Add to Ravelry cart

Purchase on LoveCrafts

 

Posted on by — 1 Comment

Monomoy Sweater

I am so excited to finally release this pattern. This one was a labor of love for me, the first sweater I designed for both my boys.

Little boys in intricately cabled sweaters are just adorable in my eyes. With two little boys at home I couldn’t resist designing a cabled sweater for them to wear. The cable patterns in both the front and back split and the cables wind around the collar. A braid winds down the outside of the sleeves. Named for Monomoy Island off of Cape Cod, Massachusetts where the twisting shoals twine like the cables on this sweater.

Add to Ravelry cart

Purchase on LoveCrafts

Purchase on PayHip

Worked in Berocco Remix yarn – 30% Nylon, 27% Cotton, 24% Acrylic, 10% Silk, 9% Linen, 216 yards (198 meters) per skein, machine washable, pictured in Strawberry and Blue Denim

Skills Required
Pattern is worked bottom-up in the round and splits at the armholes to be worked back-and-forth. Sleeves are knit in the round with a short-row sleeve cap. Cables are used throughout the pattern.

Print pattern_photo2 pattern_photo3

Tech Editor: Dana Gervais
Sizes 12m (18m, 2T, 3T, 4, 5, 6) – 21 (22, 23, 23.5, 24, 25, 25.5) inches [53 (56, 58.5, 60, 61, 63.5, 66)cm] around chest under arm holes

Add to Ravelry cart

Purchase on LoveCrafts